Zee Tech Solution

Fire alarm systems require immediate repairs and routine maintenance. A malfunctioning fire detection system poses a risk to your building’s occupants, property, and real estate. Don’t tempt fate – repair a faulty fire alert system without delay.

Performance Systems Integration provides fire alarm repair services in Seattle and Portland. We can help fix the following system problems:

• System failing to detect fire
• Notification devices failing
• Fire detection system won’t switch on
• Repeat false alarms
• Faulty LEDs
• Unable to silence alarm
• Damaged or corroded wires or electrical components
• Inaudible voice evacuation system
• Intermittent beeping
• Improperly programmed fire alarm control panels
• Damage caused by power surges or lightning
• Damage due to vandalism
• Device compatibility problems
• Improperly installed retrofits

Fire alarm repairing involves diagnosing, troubleshooting, and fixing issues in fire detection systems, covering faulty control panels, sensors (smoke/heat detectors), wiring, horns/strobes, and circuit boards, ensuring all components function to meet safety codes through component replacement (batteries, sensors, parts) and recalibration, preventing false alarms or system failures. This often includes software checks, battery replacement, cleaning, and ensuring compliance, with services ranging from minor fixes to extensive overhauls for reliable emergency alerts

The NFS2-640 intelligent fire alarm control panel is part of NOTIFIER's UL listed ONYX Series.  It's designed specifically for mid-size applications, and easily expanded via NOTIFIER's intelligent fire alarm network.

The LCM-320 Loop Control Module and the LEM-320 Loop Expander Module provides NOTIFIER’s ONYX® NFS2-640 and NFS2-3030 Fire Alarm Control Panels with additional Signaling Line Circuits.

The 3-CPU3 is the Central Processing Unit Module monitoring the status of all modules and providing the link for network communications. Although each local rail card contains their own microprocessor, the 3-CPU3 provides all inter-module communication and has the ability to download rail module operating parameters. Upon power up the 3-CPU3 automatically learns all local rail module attributes and locations. Site specific software is loaded into the 3-CPU3 which then downloads data to each local rail module. Firmware upgrades are also done from the 3-CPU3 eliminating the need to unplug chips on rail modules. Internal rail communications is accomplished in a broadcast protocol for fast response.

Mounting must be in the first two local rail spaces. Options for the 3-CPU3 include the addition of an LCD display and User Interface, RS-232 Communication Card, and RS-485 Series Network Communication Cards.

The 3-CPU3 is fully compatible with the 3-CPU and 3-CPU1 modules

The Main Display interface is the primary user interface in the EST3 Life Safety System. The main display interface focuses on the emergency user by putting information important to the user up front. Hands free, the first highest priority event is shown. The display always gives the last highest priority event. Arriving at the panel and without opening the door the first and last alarm is given. Simple to understand lights and switches help the emergency user execute system commands with confidence.

A fire alarm detector is a sensor that identifies fire by sensing smoke, heat, flame, or gases, triggering an alert to warn occupants and emergency services; these devices range from simple, standalone smoke detectors to complex, networked systems using technologies like photoelectric, ionization, or multi-sensor detection to provide early fire detection for life safety and property protection. 

FSP-951 Smoke detector Make-Notifier The Notifier FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics, and are direct replacements for the FSP-851 Series. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector's address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications as designated.

Fire alarm maintenance is a systematic process of inspecting, testing, cleaning, and repairing all components—like detectors, control panels, batteries, and notification devices (strobes/bells)—to ensure they function correctly, preventing false alarms and guaranteeing reliable fire detection and warning for life safety, involving regular checks (monthly/quarterly) and professional annual servicing to meet safety codes. 

We are also providing the Fire Alarm Repair Services in a very proper way. We are the leading supplier of Fire Alarm System too.

Fire alarm repairing involves diagnosing, troubleshooting, and fixing issues in fire detection systems, covering faulty control panels, sensors (smoke/heat detectors), wiring, horns/strobes, and circuit boards, ensuring all components function to meet safety codes through component replacement (batteries, sensors, parts) and recalibration, preventing false alarms or system failures. This often includes software checks, battery replacement, cleaning, and ensuring compliance, with services ranging from minor fixes to extensive overhauls for reliable emergency alerts