Zee Tech Solution

Honeywell’s world-class Morley Lite Fire Alarm Control Panel offers an unbeatable combination of quick installation, an enhanced feature set and advanced programming capabilities which allow installers to meet the demands of end users with flexibility in configuration.

SIEMENS FCM7204-Z3 FIRE CONTROL PANEL – NEED TO RESET THE PROGRAM – FOR PARTS OR NOT WORKING

“This Unit is being Listed FOR PARTS OR NOT WORKING. NEED TO RESET THE PROGRAM.”

HCU-2000 controller is the core unit of INTEVIO VA/PA system which performs the audio storage, signal processing, routing, control and supervision functions for the whole system. With the built-in 500W Class-D amplifier, the single controller can work as an 8-zone VA/PA system. When more power and speaker zones are needed, it can be expanded by using external power amplifier HAM-2000 and zone expander HEX-8/HEX-24.

FUNCTIONS

The controller integrates multiple functions such as audio storage, playback, zone control, audio monitoring, scheduled broadcast and fault diagnosis, etc.

Intuitive interaction design between buttons and screen

After pressing a button on the front panel, clear instructions will pop up on the LCD screen to guide the user what to do next. This increases the operational efficiency

Automatic fault diagnosis

The INTEVIO system is a fully monitored system with the ability to supervise and report faults related to the main power, backup power, CPU, microphone, amplifiers, speaker circuits and the dry contacts. The fault details will be displayed on the LCD screen and fault .logs will be stored in the internal memory

Allow all calls even when the CPU malfunctions

If the CPU of the HCU-2000 fails the INTEVIO system will still allow the user to make paging announcements (All Call) using the PTT Microphone or the call stations in case of emergencies.

Scheduled broadcast with built-in timer

HCU-2000 has a built-in timer and supports configurable scheduled broadcast without extra timing device. Record and play HCU-2000 allows Users to record the temporary messages into its built-in 1GB memory with the PTT microphone or the call station and broadcast it without configuration. It’s a function for operation efficiency improvement, especially for the application such as shopping mall/supermarket where the promotion message needs to be frequently updated.

Cost saving amplifier backup solution

IHCU-2000 has built-in amplifier automatic switch-over function and allows different amplifier backup configurations to address the needs of different applications. To back up all the amplifiers in the system, a minimum of one standby amplifier is sufficient, which greatly reduces the ownership cost on standby amplifiers.

NOTIFIER’s AMPS-24/E is an addressable power supply and battery charger with up to three 24 VDC outputs. It operates in either FlashScan® or CLIP (Classic Loop Interface Protocol) mode with the NFS-3030/NFS2-3030 Fire Alarm Control Panel (FACP). It can also be used as the primary power supply for the NCA-2 Network Control Annunciator

• Disconnect all AC power and batteries before opening the unit.
• Ground yourself with a wrist strap to prevent static discharge from damaging internal circuits.
• Remove all electronic assemblies before drilling or modifying the enclosure.
• Be careful not to overtighten screw terminals, as this can cause damage. 

• Contact authorized service providers: If the problem is beyond simple maintenance, contact authorized Notifier service providers for professional help. They can perform necessary repairs and have the expertise to avoid damaging the system.
• Refer to official manuals: Always follow the instructions in the official installation and operating manuals to ensure correct installation and maintenance.
• Check for warranty: Check the warranty status of your unit, as repairs can be costly. Unauthorized service may void the warranty.
• Schedule regular maintenance: Proper maintenance is crucial to prevent malfunctions. Schedule regular checks with a professional to keep the system in excellent working order. 

Honeywell Notifier CPS-24E, power supply for fire alarm control panel Notifier NFS-320 and NFS2-640. The main power supply is an integral part of the NFS-320/E/C and mounts directly over the control panel's circuit board.

It provides a total of 3.9 A (7.4 A in alarm) and contains an integral battery charger. Powering a variety of UL-listed 24 VDC notification appliances from four built-in NAC outputs

• The main power supply is an integral part of the NFS-320/E/C and mounts directly over the control panel's circuit board.
• It provides a total of 3.9 A (7.4 A in alarm) and contains an integral battery charger.

• Powering the NFS-320/E/C
• Powering a variety of UL-listed 24 VDC notification appliances from four built-in NAC outputs
• Providing up to 1.25 A of resettable power for four-wire smoke detectors
• Providing up to 1.25 A of non-resettable power for external devices such as the TM-4 Transmitter Module
• Providing auxiliary 24 VDC power @ 0.5 A and 5 VDC power @ 0.15 A
• Fuse: 8 amps, 250 V, 5 x 20 mm, Fast Acting, ceramic, p/n 12117.

This addressable, single loop fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. The panel also includes a 6 * 40 Character LCD display, an integrated USB port for PC programming and an RS485 port for repeaters. The DXc1 can operate as a stand-alone device or as part of a networked system with other DXc series panels in up to 16 loops.

This addressable, single loop fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. The panel also includes a 6 * 40 Character LCD display, an integrated USB port for PC programming and an RS485 port for repeaters. The DXc1 can operate as a stand-alone device or as part of a networked system with other DXc series panels in up to 16 loops.

• DPU
• TEST/METER
• DEVICE PROGRAMMER UNIT
• LOOP TESTER
• LCD
• 12 BUTTON KEYPAD